Видео

How is the antenna/VNA connected to the tuner

nice, clean fixture and excellent explanation

🙏🙏🌹🌹🌹🌹

Where do you get the RG316 with the common mode choke built in?

I watched a presentation of some amateur radio club and the the presenter said that tuners suck up radiating power and when doing QRP, one absolutely doesn't want to use tuners....I became quite incredulous when I heard this. Being new to the hobby, Is this something worth pondering over next time I take my IC-705+ random wire and AH-705 tuner for a walk?

Pure Gold ❤

হিরো ?

To Correct the 90 degree phase angle in capacitors and inductor to make it "0" degrees would need a power factor of "0" which should shift the phase from 90 degrees to 0 zero degrees?

Capacitors and inductors have a 90 degree phase shift which the phase shift will waste energy & applied power, any reasons why the phase shift will Half the power?

🙏🙏🌹🌹

Hi have you tried an OA79 point contact Ge diode? I have a bunch of them and since it is very old, I could not find data sheet spec on timing.

Really helpful and clear explanation! I hope you will continue making videos, you're a great teacher

Hi Alan ... I have an old 260 8 series (mirrored scale, protection feature and roll top case) that I used for troubleshooting for many years. When I first got it, I was really disappointed about the reverse jacks (The plug (male) is in the meter, and the jack (female) is in the test probe. With my previous 260, it was the other way around. I called Simpson and complained about it, as I only use it for low voltage work (other than the 70 Volt Line from distributed audio systems and I didn't typically work on those live anyway, everything else was typically 50V or lower.). And then I use a set of Pomona 'mini-grabbers' with them. Well, I got them to send me a pair of adapters. These were made specifically, and I still use them Their part numbers were 6-112685 and 6-112686. One of them is a little bit loose, so I've been looking for a replacement for them. Unfortunately, I've not been able to find them. Supposedly, they have a test lead set that was quite pricey #00043. I got a set just to have them. I really appreciate the info you shared, and I'm going to try out both solutions you suggested. 73, Neil, K7WK

How do you modify this circuit for PNP transistors?

I just don't understand one thing. I connected the antenna using one of the cables supplied with nanoVNA. Whenever I move the antenna everything change on the screen. Question is how to properly make all the measurements?

thank you so much for this video <3

47KOM слишком много, надо 4,7KOM. максимальный ток маленький.

Should have keyed 'subscribe' at the end 😆

In relation to Early voltage, does the lenght of the line indicate resistence? For example, long line, less resistence, short line more resistence for that current?

Is thermal runaway in tubes and transistors caused by an internal positive feedback or internal current leakage? I'm not sure why FETS don't have Thermal runaway issues any reasons why? Thermal runaway is when the tube or transistor is self biasing itself to be hotter and hotter I think due to the leakage current and positive feedback but correct me if I'm wrong

Thanks Allen, very useful

my best teacher

The first new shortwave radio I purchased as a young teen in the late 70s, and I still have it, and the owner's manual! Lot of great DX QSL had with this radio. Nice instructional video, I learned a few things.

I have question to your last section. Where you added voltage to LPF output (VcoIN) and the PLL compensated for that by varying the phase. I understand that it should happen for the transient time of the loop. But the should the PLL compensated for this additional voltage offset that you have added by decreasing its PD output and then bring the PLL to a lock. Why does your phase shifted waveform look so stable. I was imagining more of a jitter.

While I am seeing only Superheterodyne receivers, I'd like to know whether we can make a Superheterodyne transmitter. I think yes. Please let me know if I'm wrong

Most excellent !!!

I was just started to studying RF, and i watched so many videos but couldnt uderstand the IQ stuff , thanks to you i can move further, thank you so much sir, u really explained it very clearly.thanks again.

Thanks for the impressively thorough, and well presented video. I just got a litevna and am very impressed with what it can do. I thought I might "need" a better device than this, but it is plenty powerful for everything I currently want to measure.

Nice explanation! Thank you

Still valuable and excellent, and it will be even in two decades from now on. A really outstanding quality in terms of clarity, accuracy and style. Can't thank you enough for your work!

WOW!!!!!!! THANKS FOR WALKING US THRU YOUR NOTES,... EXCELLENT DESCRIPTIONS!!!... GREAT DEMO!!! THANKS!!!

Wondering what the results would be using both at the same time.

Very nice and more informative video, Thanks sir ! 😊😊😊

So does the NanoVNA connect to the tuner and then the tuner connects to the antenna? Presumably once you have it all tuned to the frequency you want to work (as per the video) you disconnect the NanoVNA from the tuner & connect the transceiver to the tuner. Great explanation as it makes it all look so simple.

I have never seen anybody assemble a circuit board like this. Very cool, And for how old this video is, you must have had a serious camera.

I love my WRC vertical, but the radials are just so inconvenient -- just ordered the faraday cloth, can't wait to add that to the arsenal.

I am giving power to my LNA of 12 volt but it not getting power power up it is generally stopping at 9.3-9.4 volt how to fix this

Love your ability to explain complex stuff in such a short time Alan, amazing little circuit condenses a lot like yourself!! hihihihi

How could you hook this up to rg8 coax go analyze etc??? The connect looks so small

Normally We are using decimals for calc..

I remember a video of a guy (using shf) demonstrating how antennas worked using very tiny antennas. It was pretty amazing. He had verticals, dipoles, beams, loops and so on.

Beware oF NYC ? Why ?

Setting up my nano with this video. Thanks so much! 😊

That clarification was cool

The patient is finally died or not sir..😅😅

Thank you for actually explaining the different kind of crimper, and how far to go, and not to go, when squeezing the crimper down. I was wondering whether I could just use the general crimper. I watched three other videos before this one and none of them explained it. I almost didn't even bother to watch this video, and now I'm glad I did.

Really great presentation and walked us through all the basic concepts with great examples.

Great video! I'm wondering if this tests components in circuit? I'd also like to know if it tests high power transistors and MOSFETS the way it's designed? Thanks

Great video :)

Great as always. Extremely helpful in helping me find out what mistake i was making with my own op amp implementation of this.